Description
Nostalgic Switches with completed wire harness for door placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. These are reverse polarity switches. These are not direct replacements for the original switches.
Nostalgic Switch dimensions:
Bezel:
Double: length = 2-1/2"; height = 1-7/8"
Single; length = 1-11/16"; height = 1-3/4"
Hole:
Double: Length = 2-3/8"; Height = 1-3/8"
Single: length = 1-5/8"; height = 1-1/4"
Nostalgic Switches with completed wire harness for door placement. The bezel is an aluminum housing which has been milled, buffed, polished and chromed. The bezel has rounded corners which resembles the GM switches of the 50's and 60's. These are reverse polarity switches. These are not direct replacements for the original switches.
Details:
Nostalgic Switch dimensions:
Bezel:
Double: length = 2-1/2"; height = 1-7/8"
Single; length = 1-11/16"; height = 1-3/4"
Hole:
Double: Length = 2-3/8"; Height = 1-3/8"
Single: length = 1-5/8"; height = 1-1/4"
Amperage
Switch Current Loading Max Current
Single Chrome, 10 AMPS 80 AMPS
Nostalgic, FTFG
Double Chrome, 10 AMPS 80 AMPS
Nostalgic, FTFG
Quad Chrome, 10 AMPS 80 AMPS
Nostalgic, FTFG
Put Dielectric grease or tuner-lube inside the switch plug - then push the pins through the switch plug. The grease will keep moisture out and helps installing the pins into the plug
One pin on the back is longer then the others. This is to help line up the other pins. If it hits the inner door skin, the regulator or any metal, it can be cut off with wire cutters. The pin is copper - DO NOT use a cut-off wheel.
The red backing plate on the switch plug is not designed to be removed. If you remove the the red backing, there will be nothing to hold it back in place. With a small pick the terminals can be removed - only if necessary.
DO NOT press in on the switch levers when installing. Apply pressure around the bezel only.
PLEASE make sure you know what you are buying before you place your order. You can call or email us with any questions that you may have before you make your purchase.Test fit parts before modifying!
Under certain circumstances where Carolina Classic Truck authorizes a product return, ALL SHIPPING CHARGES ARE THE RESPONSIBILITY OF THE CUSTOMER! Items must be returned within 30 days of receiving the shipment. Returned items may be subject to a 15% restocking fee. All items must be returned in the original containers. If an item that had FREE SHIPPING is returned, we will refund you the amount minus the original shipping cost that we incurred. **ALL ORDERS MUST BE APPROVED BEFORE ANY ITEMS ARE SHIPPED BACK TO OUR WAREHOUSE**